Feig Electronic OBID i-scan ID ISC.PRH102-B Installation Manual

Also see for OBID i-scan ID ISC.PRH102-B: Installation manual

Contents

Feig Electronic OBID i-scan ID ISC.PRH102-B Installation Manual Manual pdf 8 page image

OBID i-scan ® Installation ID ISC.PRH102FEIG ELECTRONIC GmbH Page 8 of 18 M91101-0e-ID-B.doc4. Assembly and Wiring4.1. Reader with Bluetooth™ interface ID ISC.PRH102-BThe Reader has a Bluetooth port. The supply voltage is provided only by rechargeable batteries.The Reader is activated using the Scan button. This opens a Bluetooth connection automaticallywithin approx. 3 seconds. The Reader is now ready to use. After releasing the button, the Readerremains active for several minutes. During this time the Bluetooth connection remains open.Pressing the button again immediately starts a Scan.4.1.1. Bluetooth™(BT) interfaceCommunication to the Reader is through a Bluetooth connection. Bluetooth is a short-distancewireless RF connection which enables permanent wireless communications connections betweenportable and desktop or peripheral devices. Each Bluetooth device has a unique address and canbe optionally identified with a self-explanatory name. Password protection is used for security of aBluetooth connection, with the Bluetooth partner being added to a confidential list. SPP (Serial PortProfile) is used.Initial setup of a “paired connection“ to the Reader is done by the host. After initial setup theestablishment of the bluetooth connection happens automatically by pressing the Scan button. Toestablish a connection to another Bluetooth-Dongle you must first clear the existing “pairedconnection” entry in the bluetooth interface of the reader (see 4.1.4. Reset - buttonID ISC.PRH102-B).All Readers have a factory set name and a preset password. The name "OBID_PRH102B"consists of a fixed (OBID_PRH) and a user modifiable (102B) part.Description Default settingName variable 102BPassword 1234Table 3: Standard configuration of the Bluetooth InterfaceNote:Until FECOM.DLL version 2.8.8 the COM-Port setting “Char Timeout Multiplier” from PC orNotebook should be increased to 9-10 if a Bluetooth reader is used.