Feig Electronic OBID i-scan ISC.LR200-A/B Application Note

Contents

Feig Electronic OBID i-scan ISC.LR200-A/B Application Note Manual pdf 25 page image

OBID i-scan® Application-Note ID ISC.LR(M)200FEIG ELECTRONIC GmbH Page 25 of 27 N11200-0e-ID-B.docAppendix A: Helpful tools for constructing and testing the antennasThe following equipment is recommended for tuning, troubleshooting and commissioning the an-tennas:• Laptop or personal computer (PC) running under Microsoft Windows 95, 98, ME, 2000, XP.• Service software ISCStart (V4.02 or higher). This software can be found on the OBID® i-scanCD-ROM supplied by FEIG ELECTRONIC GmbH..• SWR and Power Meter including SMA connectors (female) or appropriate adapters.• Qty. 1 cable RG 58 C/U approx. 20 – 25 cm (7.8 – 9.8 in) long with two male SMA plugs (gen-erally self-assembled).• Qty. 1 dummy load 50 Ω with male SMA plugs• Suitable screwdriver for antenna tuning, with plastic blade, 2.4x0.5mm.• 2-channel oscilloscope, sweep rate at least 10ns/Div or analog bandwidth of 100 MHz.• Qty. 2 test loops 2.5 m long (consisting of 50 Ohm, RG58 cable with BNC plug and wire loop(diameter approx. 75 mm [3.0 in]) at the other end (generally self-assembled).The following tools are optional but helpful:• HF Impedance Analyzer (for 13.56 MHz)screencentre conductorBNC-plug, maleRG58 cable 2.5 mø 75

/ 27

Related manuals for Feig Electronic OBID i-scan ISC.LR200-A/B