Fein ASCT5-40 Manual

Contents

Fein ASCT5-40 Manual Manual pdf 16 page image

16 enFor your safety.Read all safety warnings and allinstructions. Failure to follow thewarnings and instructions may result in electric shock,fire and/or serious injury.Save all warnings and instructions for future reference.Do not use this power tool before you have thor-oughly read and completely understood thisInstruction Manual and the enclosed “GeneralSafety Instructions” (document number3 41 30 054 06 1). The documents mentioned should bekept for later use and enclosed with the power tool,should it be passed on or sold.Please also observe the relevant national industrial safetyregulations.Intended use of the power tool:hand-guided screwdriver for screwing in and unscrewingscrews, especially for drywall screws, in weather-pro-tected environments using the application tools andaccessories recommended by FEIN.Special safety instructions.Hold power tool by insulated gripping surfaces, whenperforming an operation where the fastener may contacthidden wiring. Fasteners contacting a “live” wire maymake exposed metal parts of the power tool “live” andcould give the operator an electric shock.Beware of any concealed electric cables, gas or waterconduits; check the working area with a metal detector,for example, before commencing work.Secure the workpiece firmly. A work piece that is grippedtightly in a clamping device or vice, is more secure than ifheld by hand.Hold the power tool firmly. High reaction torque canbriefly occur.Do not machine any material containing asbestos. Asbes-tos is cancerogenic.Do not rivet or screw any name-plates or signs onto thepower tool. If the insulation is damaged, protectionagainst an electric shock will be ineffective. Adhesivelabels are recommended.Do not use accessories which are not specificallydesigned and recommended by the power tool manufac-turer. Safe operation is not ensured merely because anaccessory fits your power tool.Use and handling of the battery (battery pack)To avoid hazardous situations such as burns, fire, explo-sion, skin injuries, and other injuries when handling thebattery, observe the following instructions:Batteries must not be disassembled, opened or reducedin size. Do not subject batteries to mechanical impact orshock. Hazardous vapours and fluid can escape in case ofdamage and improper use of the battery. The vapours canirritate the respiratory system. Liquid ejected from thebattery may cause skin irritations or burns.When battery fluid from a damaged battery has come intocontact with objects close by, check the respective com-ponents, clean them or replace them as required.Keep the battery away from heat and fire. Do not store thebattery in direct sunlight.Do not remove the battery from its original packaginguntil it is going to be used.Before any work on the machine itself, remove the bat-tery from the power tool. If the power tool accidentallystarts, there is danger of injury.Remove the battery only when the power tool is switchedoff.Keep the battery away from children.Keep the battery clean and protect it against moistureand water. Clean contaminated battery terminals andpower tool connections with a dry, clean cloth.Character Unit of measure,internationalUnit of measure,nationalExplanationU V V DC voltagen0 /min rpm No-load speedn1 /min rpm Speed, full loadM... Nm Nm Torque (hard/soft screwdriving application)LwA dB dB Sound power levelLpA dB dB Sound pressure levelLpCpeak dB dB Peak sound pressure levelK... Uncertaintya m/s 2 m/s 2 Vibrational emission value according to EN 60745(vector sum of three directions)a h m/s 2 m/s 2 Vibrational emission value (screwdriving)m, s, kg, A, mm, V,W, Hz, N, °C, dB,min, m/s 2m, s, kg, A, mm, V,W, Hz, N, °C, dB,min, m/s 2Basic and derived units of measure from the inter-national system of units SI.WARNINGOBJ_BUCH-0000000006-001.book Page 16 Wednesday, June 23, 2010 8:08 AM