SaugenNotes and requirementsC-SC_CSSM Version 1.0 10.12.2019 Page 7 of 45All rights reserved by FEIN, especially in case of property rights applications.FEIN retains all rights of disposal, such as copying and circulation.4 Notes and requirementsPlease noteThese instructions are only intended for persons with suitable technical training. It is assumed that thereader has mechanical and electrical training.Only use original FEIN spare parts!ProvisionsPlease note that power tools may only be repaired, maintained and checked by a trained electrician, asimproper repair can result in serious risks to the user.Outside Germany, the regulations applicable in the relevant country must be observed.The provisions set out in DIN VDE 0701-0702 should be observed after repairs.The relevant accident prevention regulations are to be observed during commissioning.The German Equipment and Product Safety Act [ProdSG] applies for correct use.DisclaimerThe content of this documentation has been carefully reviewed and produced to the best of our knowledge.C. & E. Fein GmbH assumes no responsibility for the completeness, relevance, quality or correctness of theinformation provided.Liability claims against C. & E. Fein GmbH that relate to material or immaterial damage caused by the useor failure to use the information provided or by the use of incorrect or incomplete information are excluded.Claims relating to acts committed intentionally or through gross negligence are categorically excluded.INFORMATIONRead the operating instructions for the product beforecarrying out any repair work.