Fein WPO14-25E Instruction Manual

Also see for WPO14-15E: User guide Original instructions

Contents

3enFor your safety.Read all safety warnings andall instructions. Failure to fol-low the warnings and instructions may resultin electric shock, fire and/or serious injury.Save all warnings and instructions for futurereference.Do not use this power tool before youhave thoroughly read and completelyunderstood this Instruction Manual, includingthe figures, specifications, safety regulationsand the signs indicating DANGER, WARN-ING and CAUTION.Only carry out such operations with thispower tool as intended for by FEIN. Only useapplication tools and accessories that havebeen released by FEIN.Please also observe the relevant nationalindustrial safety regulations.Non-observance of the safety instructions inthe said documentation can lead to an electricshock, burns and/or severe injuries.This Instruction Manual should be kept forlater use and enclosed with the power tool,should it be passed on or sold.SAVE THESE INSTRUCTIONS.General Safety Rules.1) Work area safetya) Keep work area clean and well lit. Clut-tered or dark areas invite accidents.b) Do not operate power tools in explosive at-mospheres, such as in the presence offlammable liquids, gases or dust. Powertools create sparks which may ignite thedust or fumes.c) Keep children and bystanders away whileoperating a power tool. Distraction cancause you to lose control.2) Electrical safetya) Power tool plugs must match the outlet.Never modify the plug in any way. Do notuse any adapter plugs with earthed(grounded) power tools. Unmodified plugsand matching outlets will reduce risk ofelectric shock.b) Avoid body contact with earthed orgrounded surfaces such as pipes, radiators,ranges and refrigerators. There is an in-creased risk of electric shock if your bodyis earthed or grounded.c) Do not expose power tools to rain or wetconditions. Water entering a power toolwill increase the risk of electric shock.d) Do not abuse the cord. Never use the cordfor carrying, pulling or unplugging thepower tool. Keep cord away from heat, oil,sharp edges or moving parts. Damaged orentangled cords increase the risk of elec-tric shock.e) When operating a power tool outdoors, usean extension cord suitable for outdoor use.Use of a cord suitable for outdoor use re-duces the risk of electric shock.3) Personal safetya) Stay alert, watch what you are doing anduse common sense when operating a powertool. Do not use a power tool while you aretired or under the influence of drugs, alco-hol or medication. A moment of inatten-tion while operating power tools may re-sult in serious personal injury.b) Use safety equipment. Always wear eyeprotection. Safety equipment such as dustmask, non-skid safety shoes, hard hat, orhearing protection used for appropriateconditions will reduce personal injuries.c) Avoid accidental starting. Ensure the switchis in the off-position before plugging in.Carrying power tools with your finger onthe switch or plugging in power tools thathave the switch on invites accidents.d) Remove any adjusting key or wrench beforeturning the power tool on. A wrench or akey left attached to a rotating part of thepower tool may result in personal injury.e) Do not overreach. Keep proper footing andbalance at all times. This enables bettercontrol of the power tool in unexpectedsituations.WARNING3 41 01 130 21 0.book Seite 3 Freitag, 18. Dezember 2009 7:47 07