GAS GAS EC 125 Racing 2013 User Manual

Also see for 2005 ENDUCROSS EC 125: Service manual User manual Service manual Service manual Parts list

GAS GAS EC 125 Racing 2013 User Manual Manual pdf 17 page image

-17-- If the marks are not aligned, loosen the magnetic inertia wheelscrews and turn it.- Tighten the screws securely.- Install the magnetic flywheel cover.NOTEEngine tune-up can be adjusted to match the rider´s preferencesand skills.- Remove the magnetic flywheel cover.- Loosen the stator screws.- Adjust the engine tune-up by changing the position of the statorwithin prudent limitsNOTEFor the best engine performance, it is very important to adjustthe engine tune-up within the set of limits described.- Tighten the stator screws.- Install the magnetic flywheel cover.- Test ride the motorcycle and readjust the engine tune-up, ifnecessary.COOLING SYSTEMRadiator HosesCheck the radiator hoses for cuts or deterioration, and the connectionsfor looseness and leaks.RadiatorCheck the radiator fins for obstructions (insects or mud). Removeany obstructions with a stream of low water pressure.ELECTRONIC IGNITIONThis motorcycle uses a capacitor discharge ignition system (CDI).The ignition system should never require adjustment unless thestator of the magnetic flywheel was incorrectly installed during enginereassembly.If necessary, inspect and adjust as follows:Adjustment- Remove the magnetic flywheel cover (A).- Make sure that the mark on the stator plate is aligned with themark on the crankcase.(A)