GBC CombBind C110 Instruction Manual

Also see for CombBind C110: Comparison chart Instruction manual Instruction manual

Contents

GBC CombBind C110 Instruction Manual Manual pdf 4 page image

A. DETERMINE SHEET WIDTH:1. Rotate the edge guide to the paper / cover sizeyou wish to bind. Letter (8-1/2" x 11") A-4(297mm x 210mm) Oversized (8-3/4" 222mmx 11-1/4" 286mm) (see figure 1). When usingoversized covers, rotate the edge guide to theoversize position, punch all of the covers for yourdocuments and set aside. Rotate the edge guideto either Letter or A-4 position and punch thepaper for your document.B. PUNCHING PAPER: (see figure 2)1. Jog or align the sheets or covers and insert theedge to be punched into the punch throat opening.2. Fully insert the sheets into the throat openingand against the edge guide.3. To punch, pull the punching handle downtowards you until the handle bottoms and thepunching is complete. The CombBind C-110 willpunch up to 15 sheets of 20 lb. / 80 gsm paper.Do not punch more than (1) clear cover at atime to prevent jams.C. DETERMINE PLASTIC COMB SIZE: (see fig. 3)1. Rotate the binding handle towards you to openthe hooks away from the comb support.2. Place the document including the covers straightup against the comb support to the right sidealigning with the binding size scale. Rotate thebinding lever away from you to close the hooksuntil they make contact with the document.3. Read the line closest to the document follow itto the right to the corresponding comb bindingelement size. This is the comb binding elementsize required to bind the document. YourCombBind C-110 can bind books up to 300sheets. Or 1-1/2" (38mm). For best results,always use GBC brand covers with GBC color-coordinated binding combs.D. BINDING (see figure 4)1. Before starting make sure hooks are in thehome position.2. Place the plastic comb binding element behindthe vertical comb with the open portion of theelement facing you.3. Rotate the binding lever toward you until thecomb binding element opens sufficiently toinsert your document.4. Place the front cover (finished side down) ontothe opened binding element fingers. Place thedocument pages (face down) onto the element.Repeat for larger documents as required. Placethe back cover (finished side up) on the openbinding element fingers last.5. Rotate the binding lever away from you, back toits original position to close the binding element.6. Remove the book by lifting upward. Yourdocument is now complete.7. Once you become familiar with your CombBindC-110 you will find that you can bind as youpunch, increasing your productivity.E. EMPTY CHIP DRAWER: (see figure 5)1. Your CombBind C-110 has a chip drawer locatedon the right side of the machine. When it is fullof punched paper chad Gently pull the drawer toopen it and remove from machine, empty andre-insert the drawer back in machine until itsnaps in place.F. Service:1. Contact an authorized GBC servicerepresentative for any required repairs.0 44Specifications C110Max. width of paper: 11.7" (297mm - A4)Punching capacity, paper: 15 sheets (20 lb./80gsm)Binding capacity: 300 sheets (1-1/2"/38mm)Net weight: 15.6 lbs. (7.1 kg.)Dimensions (H x W x D): 18-1/2" (470mm) x 14" (356mm) x 13" (330mm)Subject to technical changes without prior notice.Please read these instructions carefully and keep them in a safe place for later reference.