28Press the remote controller for 1 second in the OFF state, and check its power on the left side ofthe screen. If the aircraft is connected to the remote controller, check the power of the aircraft onthe right side of the screen.Description of Remote controller ScreenConnection of Remote controller and AircraftCharging of Remote controllerOnly charge the remote controller in its OFF state. Check whether the remote controller is fullycharged according to the charger’s indicator light color. If the power indicator flashes in red, itmeans that the remote controller is being charged. If the power indicator shows a steady ON ingreen, it means that the remote controller has been fully charged. The charging duration isgenerally within 2 hours. A fully charged remote controller can be used for about 1.5 hours.※ Please use designated chargers to charge battery and remote controller. GDU will not be responsiblefor any damages or faults caused by not using original accessories.Mobile Phone Installation1. Use the appropriate data cable with micro USB side inserted into the slot.