GE 14 Owner's Manual

Also see for TOP-FREEZER 16: Owner's manual Owner's manual Use and installation guide Use and care guide with installation instructions Owner's manual

Contents

GE 14 Owner's Manual Manual pdf 9 page image

About the fresh food compartment shelves.Shelf supports at various levels allow you to custom-space your shelves.Not all features are on all models.Troubleshooting TipsInstallation InstructionsCustomer ServiceOperating InstructionsSafety InformationHalf-Width ShelvesOne end of the shelf rests on a molded side-wallsupport; a bracket on the other end hooks into a trackon the rear cabinet wall.To remove, lift the shelf up at front, then off the supportand out of the track.To replace, select desired shelf height. With shelf frontraised slightly, hook the bracket’s top lug into the track,then lower the shelf onto the support.NOTE: The shelf to the right of the track is designed tohook into the right-hand slot; the shelf to the left isdesigned to hook into the left-hand slot.2 Lift up and out1 Tilt upFull-Width ShelvesSome models have a steel wire sliding shelf, a stationarytempered glass shelf or two steel wire stationary shelves.These shelves can be moved to another place in thefresh food compartment.The full-width sliding shelf has stop-locks. When placedcorrectly on the shelf supports, the shelf will stop beforecoming completely out of the refrigerator and will nottilt when you place food on it or remove food from it.To remove the full-width shelves, lift the rear of the shelfand pull forward.To remove a full-width shelf when the fresh foodcompartment door cannot be opened fully, lift the rear ofthe shelf, pull forward and down, tilt the shelf and take itout.9