GE 15 Installation Instructions Manual

Also see for RHM 15: Owner's manual and installation instructions Owner's manual Owner's manual and installation instructions Owner's manual and installation instructions Owner's manual and installation instructions

Contents

GE 15 Installation Instructions Manual Manual pdf 5 page image

Installation InstructionsCONNECT THE TUBING TO THEREFRIGERATORNOTES:• Before making the connection to the refrigerator,be sure the refrigerator power cord is not pluggedinto the wall outlet.• We recommend installing a water filter if yourwater supply has sand or particles that could clogthe screen of the refrigerator’s water valve. Installit in the water line near the refrigerator. If usingGE SmartConnect™ Refrigerator Tubing kit,you will need an additional tube (WX08X10002)to connect the filter. Do not cut plastic tube toinstall filter.Remove the access cover.Remove the plastic flexible cap from the watervalve (refrigerator connection).Place the compression nut and ferrule (sleeve)onto the end of the tubing as shown. On GESmartConnect™ Refrigerator Tubing kit,the nuts are already assembled to the tubing.Insert the end of the tubing into the water valveconnection as far as possible. While holding thetubing, tighten the fitting.For plastic tubing from a GE SmartConnect ™Refrigerator Tubing kit, insert the molded endof the tubing into the shutoff valve and tightencompression nut until it is hand tight, thentighten one additional turn with a wrench.Overtightening may cause leaks.9TURN THE WATER ON AT THESHUTOFF VALVETighten any connections that leak.10CONNECT THE TUBING TO THEREFRIGERATOR (CONT.)Fasten the tubing into the clamp provided tohold it in a vertical position. You may need topry open the clamp.Reattach the access cover.9Tubing Clamp1/4″ CompressionNutFerrule(sleeve)SmartConnect™TubingRefrigeratorConnection1/4″ CopperTubingINSTALLING THE WATER LINE (CONT.)116

/ 6

Related manuals for GE RHM 15