GE 15 Owner's Manual
Also see for RHM 15: Owner's manual and installation instructionsOwner's manualOwner's manual and installation instructionsOwner's manual and installation instructionsInstallation instructions
                                | |
Contents
| 
21Installation InstructionsREVERSING THE HARDWARE44.1 Remove the base grille (if your refrigerator hasone) by pulling it straight out.4.2 Using a Torxdriver, move the bottom hingebracket (and shim glued to it) and plastic washerfrom the right side to the left side.Plastic WasherHinge Bracket4.3 Interchange hinge (and the shim glued to it) andscrews at top right with screws at top left of cabinet.Do not tighten screws on hinge side at this time.NOTES:• Some hinges have four holes. Which holes youuse for installing the hinge depends on whichside you install the hinge.• The outer edge of the hinge should be parallelto the edge of the case for correct installation.Installing the hinge on the left.Installing the hinge on the right.REVERSING THE DOOR HANDLES55.1 Transfer fresh food door handle5.1.1 Remove the handle plug using atape-tipped putty knife under the edge,and remove the screw underneath.Remove the two screws holding thehandle to the top of the door.5.1.2 Remove the handle.5.1.3 Remove the screws from the right edge of thedoor top and insert them into the handle screwholes on the opposite side.TopScrewsfor HandleHoles5.1.4 With tape-tipped putty knife or thin-bladescrewdriver, pry out the plug button from thehinge hole on the left side of the door andinsert it into the hole on the opposite side thatwas vacated by removal of the top hinge.Plug ButtonPlug |
Related manuals for GE RHM 15
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine