Preparing to install the refrigerator.22Operating InstructionsInstallation InstructionsSafety InformationTroubleshooting TipsCustomer ServiceRead these instructions completely and carefully.Water Supply to the Icemaker (on some models)If the refrigerator has an icemaker, it will have to be connected to acold water line.A water supply kit (containing copper tubing, shutoff valve, fittingsand instructions) is available at extra cost from your dealer.Do not install the refrigerator where the temperature will go below60°F. (16°C.) because it will not run often enough to maintainproper temperatures.Install it on a floor strong enough to support it fully loaded.Refrigerator LocationAllow the following clearances for ease of installation, proper aircirculation and plumbing and electrical connections:Sides 3/4″ (19 mm)Top 1″ (25 mm)Back 1″ (25 mm)If a 19′, 22′ or 25′ model is to be installed next to a wall on the hingeside, allow 11/2″ (44 mm) for door clearance.Clearances