GE 18 Owner's Manual
Also see for Profile 24 CustomStyle: Owner's manualUse and care & installation guideUse and care & installation guideOwner's manualUse and care & installation guide
                                        | |
Contents
| 
Removing the doors.26Before Removing the DoorsUnplug the refrigerator from its electrical outlet.Empty all door shelves, including the dairy compartment.CAUTION: Do not let either door drop to the floor. To do so coulddamage the door stop.21Read these instructions completely and carefully.Remove the Freezer DoorTape the door shut with masking tape.With a Torxdriver, remove the 2 Torx screws that hold the top hingeto the cabinet.Lift the hinge straight up to free the hinge pin from the socket in thetop of the door.Remove the tape and tilt the door away from the cabinet. Lift it off thebottom socket.Set the door on a non-scratching surface with the outside up.54321Remove the Fresh Food DoorTape the door shut with masking tape.Remove the hinge pin with a 3/8≤ socket.Remove the tape and tilt the door away from the cabinet. Remove and savethe washer on the hinge pin.Lift the door straight off the bottom hinge bracket.Set the door on a non-scratching surface with the outside up.54321Operating InstructionsInstallation InstructionsSafety InformationTroubleshooting TipsCustomer Service |
Related manuals for GE Profile 24 CustomStyle
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine