17Installation InstructionsLOADING THE RERIGERATORONTO A HAND TRUCKLeave all tape and door pads on doorsuntil the refrigerator is in its final location.To move the refrigerator, use a paddedhand truck. Center the refrigerator on thehand truck and secure the strap aroundthe refrigerator. DO NOT OVERTIGHTENTHE STRAP.1REMOVE THE BASE GRILLERemove the grille by removing the twoPhillips head screws.2If the refrigerator must go throughany entrance that is less than 38″wide, the doors must be removed.Proceed to Step 3.DO NOT remove the handles.If all entrances are more than38″ wide, skip to Installingthe Refrigerator.DISCONNECT THE WATERCOUPLING (on some models)If the refrigerator has a water dispenser,there is a water line from the cabinet intothe bottom hinge on the freezer door thatmust be disconnected.To disconnect, push in on the white collarof the coupling and pull out the tubing.3White collarBottomfreezerhingeMOVING THE REFRIGERATOR