– 14Calrod ElementTo Remove Calrod Element:1. Disconnect the power to the dishwasher.2. To remove the access panel, remove two 1/ 4-in.hex-head screws from the bottom of the panel.Loosen the 2 Phillips-head screws at the top,slide the panel to the left , and pull toward y ou.3. Remove the Calrod terminals and unscrew thetwo 13/ 16-in. Calrod nuts counterclockwise.4. Remove the 3 Calrod supports.5. Lift and remove the Calrod.Spray Arm BaseTo Remove the spray arm base:1. Remove the spray arm and fine filter assemblies.2. Insert a large flat-blade screwdriver into theopening in the back of the spray arm base.3. Engage the screwdriver blade with themolded filter coupler and turn the basecounterclockwise.https://appliancetechmanuals.com

GE 31-9155 Technical Service Manual

Nomenclature

Introduction

Pump Assembly

Component Locator Views

electronic control

front view

Components

Collection Chamber and Sump

Calrod Element

High Drain Loop/Air Gap

Filter and Drain System

Warranty

31-9155