GE 450 Owner's Manual

Contents

GE 450 Owner's Manual Manual pdf 8 page image

Operating Instructions Safety InstructionsConsumer Support Troubleshooting Tips8About reversing the door.Reversing the DoorTools needed: Standard #2 Tape-tipped Needle-nosedPhillips screwdriver putty knife pliersOpen the door and remove the filler plugs opposite the hinges. With the doorcompletely open, remove the bottom screw from each hinge on the dryer face. Insertthese screws about half way into the TOP holes, for each hinge, on the opposite side(where you removed the filler plugs). Apply firm pressure to get the screw started inuntapped holes.Loosen top screw from each hinge on the dryer face half way. With one hand holdingthe top of the door and the other hand holding the bottom, remove the door fromthe dryer by lifting it UP and OUT.Rotate the door 180°. Insert it on the opposite side of the opening by moving the doorIN and DOWN until the top hinge and the bottom hinge are resting on the top screwsinserted in step 1.Remove the remaining screws from the side of the opening from which the door wasremoved. With these screws secure each hinge at the bottom. Tighten the two topscrews of each hinge. Reinsert the plastic plugs on the side from which the door wasremoved.4321