GE Advantium PSB1200BB Installation Instructions Manual

Also see for Monogram Advantium ZSC1201: Installation instructions Installation instructions Installation instructions Installation instructions Installation instructions

Contents

GE Advantium PSB1200BB Installation Instructions Manual Manual pdf 4 page image

Installation Preparation4ELECTRICAL REQUIREMENTSSingle Advantium 120 Installation:This product requires a 120-volt, 60 Hz, 15-amp circuitand draws 1.8 kilowatts. This product must beconnected to a supply circuit of the proper voltageand frequency.• Wire size must conform to the requirements of theNational Electrical Code or the prevailing local codefor this kilowatt rating.• The power supply cord and plug should be broughtto a separate 15 or 20 ampere branch circuit singlegrounded receptacle. The outlet box should belocated within reach of the 48" power cord.ELECTRICAL LOCATION IMPORTANT: (Please read carefully).The power cord of this appliance is equipped witha three-prong (grounding) plug that mates witha standard three-prong grounding wall receptacleto minimize the possibility of electric shock. Thecustomer should have the wall receptacle andcircuit checked by a qualified electrician to makesure the receptacle is properly grounded and hasthe correct polarity.• Where a standard two-prong wall receptacle isencountered, it is the personal responsibility andobligation of the consumer to have it replaced witha properly grounded three-prong wall receptacle.Do not, under any circumstances, cut or removethe third (ground) prong from the power cord.DO NOT USE AN EXTENSION CORD.Install a recessed electrical outlet in the back wallof the opening within 6″ of either side and at least9″ above the cutout floor.Locate outlet box in the shaded area6”9”