GE C2S985 Technical Service Manual

Also see for Appliances C2S985: Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions Owner's manual and installation instructions Owner's manual and installation instructions Owner's Manual & Installation Instructions

Contents

GE C2S985 Technical Service Manual Manual pdf 49 page image

– 49 – (Continued next page)Note: The control display will show LOC ON if therange lockout pad is touched and the cooktop lockswitch is in the closed position.Control display will show LOC OFF if the rangelockout pad is touched and the cooktop unlockswitch is in the closed position.• LOC will flash on and off in the display while thelock motor is in motion. When the cooktop is locked,LOC ON remains illuminated in the display.• CAM – The cam on the motor performs twofunctions:1. It positions the lock valve in the open or closedposition.2. It operates the lock switches, which tell thecontrol if the lock valve is unlocked or locked.SWITCH POSITION – LOCKOUT VALVE OPENSWITCH POSITION – LOCKOUT VALVE CLOSEDCooktop UnlockSwitch – ClosedCooktop UnlockSwitch – OpenCooktop LockSwitch – OpenCooktop LockSwitch – ClosedLockout ValveThe range lockout feature (on some models), willallow the user, thru the ERC control, to lock out thesurface burners, oven burners, and control panel, sothey cannot be activated. (See Control Features.) Thepurpose of the lockout valve is to shut off the gassupply to the surface burners when this feature isselected.Note: The cooktop is locked out when the oven is inself-clean mode. (See Control Features.)The lockout valve will not operate if a surface burneris in the on position. The ERC AUX terminal sendspower across the surface burner switches, whenthey are closed, to the motor lockout valve.The gas lockout valve incorporates 2 switches toallow the ERC to know the position of the lockoutvalve. The yellow to orange wires close whenthe valve is open, which allows gas to flow to thecooktop. When the switch opens, the yellow tosilver wires close when the valve is closed. Loss ofthe yellow to orange contact will cause the lockoutmotor to run continuously, and LOC will flash in theERC display. Loss of the yellow to silver wires willcause the lockout motor to run continuously whenLOCKOUT or SELF CLEAN is selected and LOC willflash in the display. LOC will display steady whenthe cooktop is locked out.ERC