Care and cleaning of the range.\Wire cover holderOven Light Replacement (on some models)Be sure to let the light cover and bulb coolcompletely.To remove the cover:[-71 Hold a hand under the cover so it doesn'tfall when released.With fingers of thesame hand, firmly push back the wirecover holder. Lift off the cover.Do not remove any screws to remove the cover.To replace the cover:[_ Place it into groove of the light receptacle.Pull wire forward to the center of thecover until it snaps into place.[] Connect electrical power to the range.Replacebulb with a 40-watt appliancebulb.WARNING SHOCK OR BURN HAZARD: Before replacing oven light bulb, disconnect the electricalpower to the range at the main fuse or circuit breaker panel. Failure to do so may resultin electric shock or burn.Oven Heating Elements (on some models)Do not clean the bake element or the broilelement.Any soil will burn off when theelements are heated.To clean the oven floor, gently lift the bakeelement. Clean with warm, soapy water.36