GE CFE29TS Manual

35• While heating water if the consumer presses one of the buttons on the user interface; Water,Crushed, Cubed, Lock, Precise Fill, and Hot Water, the LCD screen will display 'Do You Want toCancel?‘ and continue to heat.• If the consumer selected 'YES', The LCD screen will display 'Hot Water Canceled‘ for 3 seconds,terminate water heating then go to the refrigerator home screen and the control will execute theselected function.• If the consumer selected 'NO', the LCD screen will revert to the previous screen and the control willcontinue hot water operation.• The Hot Water system is not active while the control is in ‘Sabbath’, ‘Demo’ or ‘Service’ modes.• The USB uploading is disabled while the control is in Hot Water Dispense Mode (dispensing hotwater).• If a Hot Water system fault occurs the UI screen will display 'Hot Water Canceled’. (See mini-manual for fault codes)• The Hot Water heating countdown time is only an estimate displayed in 15 minute intervals.• Countdown timer can hold for more than 15 seconds at any time or skip a 15 second interval.(examples: timer could go from 45 sec. to 15 sec. skipping 30 sec. )• In ‘Purge Mode’ even though the pad says “Empty Tank’ the tank is not emptied it dispenses thehot water which is replaced with filtered water.• Hot Water works best with household water pressure of 40 to 100 PSI.Hot Water Operation Notes