GE CV936 Owner's Manual And Installation Instructions

Also see for Appliances CV936: Owner's Manual & Installation Instructions Owner's manual and installation instructions Owner's Manual & Installation Instructions Owner's manual and installation instructions Owner's Manual & Installation Instructions

Contents

Installation Instructions11TOOLS AND MATERIALSREQUIRED (NOT SUPPLIED)Pencil andtape measureSpirit levelPhillips andFlat blade screwdriversDuct tapeElectric drill with1/8 and 3/8 bits1/4 pivoting hex socketSafety glassesFlashlightSaber saw or Key Hole SawTin SnipsHammerPliersAdditional Materials:• 120V 60Hz. 15 or 20 Amp, 2 wire with ground.Properly grounded branch circuit.• Strain relief for junction box.• 7” round metal duct, 3-1/4” x 10” rectangular ductor 3-1/4” x 12” rectangular duct length to suit installation.Wire Cutter/StripperLadderAllenWrenchREMOVE THE PACKAGING• Lift the hood out of the box.• Remove shipping screws holding the wood mountingpiece to the back side of the hood. Set aside woodmounting piece and screws for later installation. Do notdiscard.• Remove junction box cover and knockout.• Install strain relief onto back or top of hood.• Remove all tape and packing material from thehood, duct transition and motor.UL Listed Wire nuts• Remove parts package from the shaped cardboardinsert.“V”• Remove the shaped carton insert.“V”• Remove the small box housing the motor.″ ″″WoodMountingSupportHoodPartsPackageShipping CartonMotor