GE Digital Energy GT6000 User Manual

3 INSTALLATION3.1 PACKAGE CONTENTSThe UPS shipping box contains:• 9 plastic parts• 4 metal parts (rackmount installation see 3.3.1)• 1 screws set – 1 display sticker (vertical orientation)• 1 RS232 cable• 1 CD-ROM (Software Tool)• 1 parallel cable• this manualThe Battery cabinet shipping box contains:• 4 plastic parts• 4 metal parts (rackmount installation see 3.3.1)• 1 screws set• 1 battery cable• 1 display sticker (vertical orientation)Inspect the UPS for damage after unpacking. If any damage is present please immediately notify the carrierand place of purchase.WARNING! In case of recognizable damage:DO NOT connect any voltage to the unitDO NOT put the unit into operation3.2 INSTALLATION RULESIMPORTANTBefore making any connection and switching on the GT Series UPS, please check the followingconditions:• Your mains supply is 220 - 240 Volts and 50 Hz (if the mains frequency is 60Hz, the output frequency of theUPS can be changed, see note in section 4.4.4), and• The total power demand of the connected equipment does not exceed the rated output power of the GTSeries UPS (the rear panel of the UPS shows the model, chapter 9 the ratings).• Avoid locations that are excessively humid, near water, near heat sources or in direct sunlight.• The ambient temperature should not exceed 40°C. Optimal battery lifetime is obtained if the ambienttemperature does not exceed 30°C.• It is important that ventilation air can move freely around and through the unit. Do not block the air vents.• The branch circuit supply has to be protected as follows:UPS model branch protectionGT Series 6kVA 25A slowGT Series 10kVA 50A slowCAUTIONTo reduce risk of fire, connect the UPS only to a circuit provided with the fuse valuesaccording to the above.modifications reserved 6 User manual GT Series 6 - 10 kVA UPS 1.0 (GB)www.upsdirect.com08456 445 002