GE ECBS68 Owner's Manual And Installation Instructions

Also see for ECBS68: Owner's manual

Contents

GE ECBS68 Owner's Manual And Installation Instructions Manual pdf 29 page image

29OperatingInstructions Care and Cleaning InstallationInstructions Troubleshooting TipsSafety Instructions Consumer SupportThe Ceramic Cooktop Scraper andall recommended supplies areavailable through our dealers orthrough a Camco Parts Store.NOTE: Do not use a dull or nickedblade.Use a Cleaning Pad for CeramicCooktops.Clean your cooktop aftereach spill. Use CeramicCooktop Cleaner.WARNING: DAMAGE to your glasssurface may occur if you use scrub pads otherthan those recommended.Allow the cooktop to cool.Spread a few drops of CeramicCooktop Cleaner on the entireburned residue area.Using the included Cleaning Pad forCeramic Cooktops, rub the residuearea, applying pressure as needed.If any residue remains, repeat thesteps listed above as needed.For additional protection, after allresidue has been removed, polishthe entire surface with CeramicCooktop Cleaner and a paper towel.Cleaning the glass cooktop. (on some models) GEAppliances.caNormal Daily Use CleaningONLY use Ceramic Cooktop Cleaner onthe glass cooktop. Other types of cleanersmay not be as effective.To maintain and protect the surface ofyour glass cooktop, follow these steps:Before using the cooktop for thefirst time, clean it with CeramicCooktop Cleaner. This helps protectthe top and makes cleanup easier.Daily use of Ceramic CooktopCleaner will help keep the cooktoplooking new.Shake the cleaning cream well.Apply a few drops of CeramicCooktop Cleaner directly to thecooktop.Use a paper towel for CeramicCooktops to clean the entirecooktop surface.Use a dry cloth or paper towelto remove all cleaning residue.No need to rinse.NOTE: It is very important that you DO NOT heatthe cooktop until it has been cleaned thoroughly.Burned-On ResidueAllow the cooktop to cool.Use a single-edge razor blade scraperat approximately a 45° angle againstthe glass surface and scrape the soil.It will be necessary to apply pressureto the razor scraper in order toremove the residue.After scraping with the razor scraper,spread a few drops of CeramicCooktop Cleaner on the entireburned residue area. Use theCleaning Pad to remove anyremaining residue.For additional protection, after allresidue has been removed, polishthe entire surface with CeramicCooktop Cleaner and a paper towel.Heavy, Burned-On Residue