GE FPDW, 134176300B Installation Instructions Manual

IMPORTANT: Read and save these instructions.Washer & Dryer Pedestal KitThis kit is intended to be installed by persons having electrical and mechanical training and alevel of knowledge considered acceptable in the appliance repair trade.Your safety and the safety of others are veryimportant. Many important safety messages areprovided in these instructions and on yourappliance. Always read and obey all safetymessages.EXCESSIVE WEIGHT HAZARDTwo or more people may be required to move andinstall the washer & dryer with pedestals.Failure to comply may cause back or other injury.Tools needed:Level9/16" open end wrench or ratchetChannel-lock adjustable pliers2# Phillips screwdriverFlat blade screwdriverWASHER INSTALLATIONWasher Hardware......Remove the 24-3/8" x 27" x 12"pedestal,installation hardware and instructions from theshipping carton.Using the pedestal shipping carton forprotection, carefully lay the washer on its back.NOTE: If washer was previously installed,disconnect from power supply, remove inlethoses from water faucets and tape the drain hoseto the top front of the washer to eliminate excesswater on the floor.Remove the four (4) leveling legs from thewasher base and discard.If the washer has rollers, remove the four (4)screws securing the rollers to the base.Install the four (4) leveling legs (supplied withthe kit) fully into the pedestal.The words "TOP FRONT" are embossed on thetop front of the pedestal. Position the pedestal sothe words are up with the front of the washer.Align the pedestal mounting holes with thethreaded leg holes on the washer base.

/ 4

Related manuals for GE FPDW