00Connecting the camera and printer.1. Make sure both the camera and printer areturned on.2. Connect one end of the supplied USB cableto the USB port on your camera.3. Connect the other end of the cable to theUSB port on the printer.If the camera is not connected to a PictBridgecompatible printer, the following errormessage appears on the LCD screen.The above error message wouldalso appear if the USB mode wereset incorrectly, in which case youshould disconnect the USB cable,check the USB mode settings,ensure that the Printer is turnedon, and then try connecting theUSB cable again.Downloaded From camera-usermanual.com General Electric Manuals