GE GCS04 Owner's Manual And Installation

Also see for GCS04: Owner's manual and installation

Contents

7Consumer SupportTroubleshooting TipsOperating InstructionsSafety Instructions InstallationInstructions Care and CleaningCare and cleaning. www.GEAppliances.caIf the power fails, open the door asinfrequently as possible to maintainthe temperature. A gradual rise intemperature should not have anyadverse effect on the beverage.If it is extremely hot, you may want tounload the beverage from the beveragecentre and move the beverage to a coolerlocation until power is restored.When power is restored, the controlsautomatically are set to the Factory Setting41°F (5°C). If needed, reset the controlsto the desired setting.In the Event of a Power FailureUnload the beverages, then secure theracks and door by taping them in place toprevent damage.Be sure the beverage centre stays in an uprightposition during the move.Preparing to MoveReplacing the light bulb (available on some models)Unplug the beverage centre.If the door is locked, unlock it.The light bulb is located behind the Light Shield in the ceilingof the beverage centre near the front. To remove the light shield,remove Screw. Gently pull down on the bottom of the Light shield torelease it.Unscrew the light bulb from the Socket.Replace with a 10 watt, 120 volt refrigerator bulb. This type of bulb isavailable at most hardware and automotive parts stores.WARNING: Using a bulb rated higher than 10 watts may damagethe beverage centreAttach the Light Shield to the Bulb Housing with Screw .Plug the beverage centre back in.234567C