GE GDF410SGFBB Installation Instructions Manual

Two M4 Phillips flat head wood screws, 14mm long2Installation PreparationPARTS SUPPLIED:to secure dishwasher to underside of countertop (in literature package).2 Wood ScrewsMATERIALS YOU WILL NEED: Ferrule, compression nut and 90° Elbow (3/8”NPTexternal thread on one end, opposite end sized tofit water supply) Thread seal tape UL Listed wire nuts (3)90° Elbow,Ferrule andCompression NutHandShut-OffValveThreadSeal TapeWire Nuts (3)Materials For New Installations Only: Air gap for drain hose, if required Waste tee for house plumbing, if applicable Electrical cable or power cord, if applicable Screw type hose clamps Strain relief for electrical connection. Hand shut-off valve Water line 3/8”min. copper Coupler for extending drain line, if applicableWaste TeeElectrical Cable(or Power Cord, if applicable)Hot Water lineAir Gap Screw TypeHose ClampsStrain ReliefCouplerTOOLS YOU WILL NEED: Phillips head screwdriver 5/16”and 1/4”nutdriver 6” Adjustable wrench Level Carpenters square Measuring tape Safety glasses Flashlight Bucket to catch water when flushing the line GlovesFor New Installations Only: Tubing cutter Drill and appropriate bits Hole saw setScrew Driver IINutdriver Crescent WrenchLevel 2Carpenters SquareMeasuring TapeSafety GlassesFlashlightTubing CutterDrill & BitsPhillips headscrewdriver 5/16”and1/4”nutdriver 6” AdjustablewrenchLevelCarpenterssquareMeasuring tapeSafety glasses FlashlightBucket GlovesTubing cutter Drill and Bits Hole saw set