GE GDF410SSF0SS Installation Instructions Manual

9Installation InstructionsSTEP 11 – SECURE DISHWASHER TOCABINETThe dishwasher must be secured to the countertop.•Position the dishwasher so that the tub flange alignswith the front face of the cabinet frame.IMPORTANT - Check to be sure thedishwasher is centered in the opening and there is nointerference with adjacent cabinets when opening orclosing the door.•Fasten the dishwasher to the underside of thecountertop with the 2 Phillips screws provided.IMPORTANT - Drive screws straight andflush. Protruding screw heads will scratch the top of thecontrol panel and can interfere with door closing.Figure 18Align TubFlangeto FrontFace ofCabinetFrameSTEP 12 – CONNECT WATER SUPPLYConnect water supply line to 90° elbow.•Slide compression nut, then ferrule over end of water line.•Insert water line Into 90 elbow .•Slide ferrule against elbow and secure with compressionnut.IMPORTANT - Check to be surethat door spring does not rub or contact the fill hose orwater supply line. Test by opening and closing the door.Re-route the lines if a rubbing noise or interferenceoccurs.Figure 19Ferrule90 ElbowCompression NutHot WaterSupply Line90 Elbow