GE GDF510-540 Series Owner's Manual

Also see for GDF510-540 Series: Owner's manual Owner's manual

Contents

GE GDF510-540 Series Owner's Manual Manual pdf 6 page image

6Using the dishwasher. GEAppliances.comCheck the Water TemperatureUse a Rinse Agent such as Cascade Crystal Clear®Rinse agents such as Cascade Crystal Clear ® remove spots and prevent new film buildup on your dishes, glasses,flatware, cookware and plasticFilling the DispenserThe rinse agent dispenser holds 3 5 oz (103 5 ml) of rinse agent Under normalconditions, this will last approximately one month Try to keep it full, but do not overfill1 Make sure the dishwasher door is fully open2 Open the RINSE AID dispenser door3 Add rinse agent until the indicator window looks full4 Clean up any spilled rinse agent with a damp cloth5 Close the RINSE AID dispenser doorRinse Aid SettingThe amount of rinse agent released into the final wash can be adjusted The factorysetting is at the midpoint If there are rings of calcium (hard water) spots on dishes, try ahigher setting If you see foam in the dishwasher, move the indicator to a lower settingTo adjust the settingOpen the RINSE AID dispenser door; then turn the adjuster counterclockwise to increasethe amount of rinse agent, clockwise to reduce the amount of rinse agentThe entering water should be at least 120°F (49°C) andnot more than 150°F (66°C) for effective cleaning and toprevent dish damage Check the water temperature with acandy or meat thermometer Turn on the hot water faucetnearest the dishwasher, place the thermometer in a glassand let the water run continuously into the glass until thetemperature stops risingRinseagentadjusterIndicatorwindow