GE GDL22KCWSS Owner's Manual And Installation Instructions

Also see for 20: Owner's manual Use and care guide Use and care Owner's manual and installation instructions Owner's manual and installation instructions

TOOLS YOU WILL NEEDInstallation InstructionsREMOVING THE DOORS (Double Door Refrigerator Models only)IMPORTANT NOTESNOTE: Door swing is not reversible.• Read the instructions all the way throughbefore starting.• Handle parts carefully to avoid scratchingpaint.• Set screws down by their related parts toavoid using them in the wrong places.• Provide a non-scratching work surface forthe doors.IMPORTANT: Once you begin, do not movethe cabinet.These instructions are for removing thedoors.Unplug the refrigerator from its electricaloutlet.Empty all door shelves, including the dairycompartment.Putty Knife orThin-blade ScrewdriverMasking TapeAdjustable Wrench 3/8″ and 10 mm SocketRatchet/DriverREMOVE THEREFRIGERATOR DOORSTape the doors shut with masking tape.Remove the screw securing each hingecover, lift the hinge cover and place tothe side on top of the refrigerator.Carefully disconnect the wire connectorand remove the screw securing theground wire.Using a 3/8″ or 10 mm socketratchet/driver, remove the bolts securingthe top hinge to the cabinet. Then lift thehinge straight up to free the hinge pinfrom the hinge pin hole in the top of thedoor. Carefully remove the wires from thehinge pin through the slot.Remove the tape and tilt the door awayfrom the cabinet. Lift the door off thecenter hinge pin. Ensure that the whitehinge pin thimble remains on the centerhinge pin or inside door hinge pin holelocated in the bottom of the door.Set the door on a non-scratching surfacewith the inside up.1ABDETop HingePhillips Screwdriver28Hinge CoverWireConnectorGround WireCHinge PinSlotHinge PinThimblePARTS INCLUDEDC Spacer (on some models)(appearance may vary)(appearance may vary)