GE GFDN240 Owner's Manual

Also see for GFDN240: Owner's manual Owner's manual Owner's manual Technical service guide

GE GFDN240 Owner's Manual Manual pdf 23 page image

23About the dryer control panel.PowerPress to “wake up” the display. If the display is active, press to put the dryer in the standby mode.NOTE: Pressing POWER does not disconnect the appliance from the power supply.Dry CyclesThe dry cycle controls the length and tumble speed of the drying process. The chart below will help you match the drysetting with the loads.Sensor Cycles DescriptionCOTTONS For cottons and most linens.NORMAL/MIXED LOADS For loads consisting of cottons and poly-blends.EASY CARE For wrinkle-free and permanent press items.ACTIVE WEAR Clothing worn for active sports exercise and some casual wear. Fabrics include newtechnology finishes and stretch fibers such as Spandex.DELICATES For lingerie and special-care fabrics.SPEED DRY For small loads that are needed in a hurry, such as sports or school uniforms. Can also beused if the previous cycle left some items damp, such as collars or waistbands.12Timed Dry Cycles DescriptionWARM UP Provides 10 minutes of warming time to warm up clothes.AIR FLUFF Use this feature to tumble items without heat.DEWRINKLE(on some models)For removing wrinkles from items that are dry or slightly damp. This cycle is notrecommended for delicate fabrics.STEAM REFRESH(on some models)For slightly wrinkled dry garments. Significantly reduces wrinkles on up to 5 garments. Afterthe STEAM REFRESH Cycle, the unit will beep and display “0:00.” If the unit is not turned offor if the door is not opened, the dryer will continue to tumble for 30 minutes. At the end of 30minutes, it will display “0:00” and the cycle will be complete.Note: A single extremely light fabric item may need to have an additional item included in theSTEAM REFRESH cycle to achieve optimum results.STEAM DEWRINKLE(on some models)For use with larger loads than STEAM REFRESH. Ideal for loads left in dryer for an extendedtime.My Cycle DescriptionMY CYCLE Press to use, create or modify custom dry cycles. (See page 8 for more details)Timed DryUse to set your own dry time. TIMED DRY is also recommended for small loadsTo use TIMED DRY:1. Turn dry cycle dial to TIMED DRY.2. Increase the drying time by pressing the TIMEDRY ADJUST + button.Note: This button only increases the time. When max time is reached, pressing the button again will reset the counter tothe lowest setting.3. Select the TEMP.4. Close the door.5. Press Start3www.GEAppliances.ca