GE GFDR480EFWW Installation Instructions Manual

Also see for GFDR480: Owner's Manual & Installation Instructions Owner's manual and installation instructions Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions Owner's manual

GE GFDR480EFWW Installation Instructions Manual Manual pdf 6 page image

Control settings.6Add TimePress to add time to the Steam Dewrinkle,Warm Up, Air Fluff or Time Dry cycles.3Dry TempYou can change the temperature of your drycycle.4High For regular to heavy cottons.Medium For synthetics, blends and items labeled Permanent Press.Low For delicates, synthetics and items labeled Tumble Dry Low.Extra Low For lingerie and special-care fabrics.No Heat This option may only be used with Air Fluff, in which items are tumbled withoutheat.Sensor Dry LevelThe sensor continuously monitors the amount ofmoisture in the load. When the moisture in yourclothes reaches your selected dry level, the dryerwill stop.NOTE: Sensor dry Level only works withCottons, Normal, Active Wear, Delicates,Speed Dry, Bulky, Towels/Sheets, Sanitizeand Steam Dewrinkle cycles.5Extra Dry(on some models)Use for heavy-duty fabrics or items that should be very dry, such as towels.More Dry Use for heavy or mixed type of fabrics.Dry Use for normal dryness level suitable for most loads. This is the preferred cycle forenergy saving.Less Dry Use for lighter fabric (ideal for ironing).Damp For leaving items partially damp.6 Start/PausePress to start a dry cycle. If the dryer isrunning, press it once and it will pause thedryer. Press it again to resume the dry cycle.7 My CycleSet up your favorite combination of settingsand save them here for one touch recall.These custom settings can be set while a cycleis in progress.To store a My Cycle combination of settings:1. Select your drying cycle.2. Change Temp and Level settings to fit yourneeds.3. Select any drying options you want.4. Press and hold the My Cycle button for 3seconds to store your selection. A beep willsound and the button will light up.To recall your stored My Cycle combination:Press the MY CYCLE button before drying aload.To change your stored My Cyclecombination:Repeat steps 1–4.