GE GFDS150GDWW Owner's Manual

Also see for Appliances GFDN110: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

Contents

GE GFDS150GDWW Owner's Manual Manual pdf 7 page image

7PowerPress to “wake up” the display. If the display is active, press to put the dryer in the standby mode.NOTE: Pressing Power does not disconnect the appliance from the power supply.Dry CyclesThe dry cycle controls the length and tumble speed of the drying process. The chart below will help you match the drysetting with the loads.Sensor Cycles DescriptionNormal Mixed Load For loads consisting of cottons and poly-blends.Cottons For cottons and most linens.Bulky Bedding(on some models)For large coats, bed spreads, mattress covers, sleeping bags and similar large and bulkyitems. Large items such as blankets, comforters, jackets and small rugs.Easy Care(on some models) For wrinkle-free and permanent press items.Delicates For lingerie and special-care fabrics.Speed Dry For small loads that are needed in a hurry, such as sports or school uniforms. Can also beused if the previous cycle left some items damp, such as collars or waistbands.12Time Dry Cycles DescriptionWarm Up(on some models) Provides 10 minutes of warming time to warm up clothes.Air Fluff/No Heat Use this feature to tumble items without heat.DeWrinkle/Full Loads(on some models)For removing wrinkles from items that are dry or slightly damp. This cycle is notrecommended for delicate fabrics.Steam DeWrinkle/Full Loads(on some models)For slightly wrinkled dry garments. Significantly reduces wrinkles on garments. After thiscycle, the unit will beep and display “0:00.” If the unit is not turned off or if the door is notopened, the dryer will continue to tumble for 30 minutes. At the end of 30 minutes, it willdisplay “0:00” and the cycle will be complete.Note: A single extremely light fabric item may need to have an additional item included inthe cycle to achieve optimum results.My Cycle DescriptionMy Cycle(on some models)Press to use, create or modify custom dry cycles. (See the My Cycle section for moredetails.)Time DryUse to set your own dry time. Time Dry is also recommended for small loadsTo use Time Dry:1. Turn dry cycle dial to Time Dry.2. Increase the drying time by pressing the Time Dry button.Note: This button only increases the time. When max time is reached, pressing the button again will reset the counterto the lowest setting.3. Select the Temp.4. Close the door.5. Press Start3GEAppliances.com