– 11 –About cycle options.NOTE: Not all features are available on all dryer models. GEAppliances.comExtended TumbleMinimizes wrinkles by adding approximately60 minutes of no-heat tumbling after clothesare dry. The beeper will sound every twominutes as a reminder to remove the clothes.The ESTIMATED TIME REMAINING display willshow 00.The Extended Tumble time does not getadded to the cycle time on the displayDamp AlertThis option causes the dryer to beep whenclothes have dried to a damp level. Removeitems that you wish to hang dry. TheDAMP ALERT will only beep when this optionis selected.Removing clothes and hanging them whenthey are damp can reduce the need to ironsome items.Delay StartUse to delay the start of your dryer.1. Choose your dry cycle and any options.2. Press DELAY START. You can increasethe delay time in 1 hour increments usingthe DELAY START button.3. Press the START pad to startthe countdown.NOTES: If the door is opened while the dryer isin DELAY START, the countdown timewill not restart unless the door is closedand START has been pressed again.e-DRYReduces the total energy consumption ofspecific dryer cycles by adjusting certainheat settings.Note: Cycle times will change when e-DRY isselected.This feature can be used with DELICATES,ACTIVE WEAR, EASY CARE, NORMAL/MIXEDLOADS and COTTONS.SignalAlerts you that the cycle is complete.The beeper will continue to sound everyminute for the next 5 minutes, until theclothes have been removed. The clothesshould be removed when the beeper goesoff so wrinkles don’t set in.Press SIGNAL to select low, medium or highvolume, or to turn the beeper off.(Continued Next Page)