HOW TO CWGE COLOR PMLSIf you are redecorating, you can change your dishwasher’s front panel tomatch or blend witi your new colors by flipping it over. Each side of eachpanel is a different color. You may dso paint a panel with a color of yourown choice.How to Change the Door Panel:1. Take out trim screws on either side of thedishwasher door. Remove the side trim.2. Slide the door panel out.(Careful-edges may be sharp.)3. Turn the door panel around ad put the color youwant in front.4. Replace the door panel, side trim and screws.NOTE: Do not operatedishwasher wtie changingpanek or when lower acc~spanel is removed.How to Change the Lower Panel:Bottom Panel Attachment %rews1. Remove the bottom panel attachment screws.2. On models without top mounting screws, removethe entire access assembly by lifting it up and overthe retaining tabs.3. On models with top mounting screws, removethe screws.4. Take out the top trim screws and remove thetop trim.5. Slide the color panel(s) up and out and put thecolor you want in front.6. Replace the top trim and screws.7. Replace the entire access assembly by reversingthe steps.Wood panel trim kiti contain trim andins~ctions for adding a decorative wood doorpanel and lower access panel no thicker than 1/4”to match kitchen cabinets.Specify the trim color of your choice from thefollowing options:GPF40BC (Chrome Trim and Screws)GPF40BK (Black Trim)GPF40W (mite Trim)The kit is available for $5.00 (shipping and handling).Make check payable to the General Electric Co.Color PanelsIf you have redecorated, and the color panels inyour dishwasher do not blend with your new colorscheme you may order the additionrd color panelwithout charge.Specify the color panel number when ordering:GPF24 Wte/MmondGPF25 Coffee/AvocadoOrder a Trim Wt or a Color Pmel from:GE Appliancesc/o Dri-View Manufacturing4706 Mlmond Ave.Louisville, KY 402091A