GE GSD1000 Owner's Manual

Also see for GSD1000 series: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

Contents

GE GSD1000 Owner's Manual Manual pdf 5 page image

Cycle ChartModel Cycle Water Usage (gal.) Cycle Time (min.)GSD1000, Hot Start Option 13.3 97GSD1100 Heavy Wash 9.9 71Normal Wash 8.4 66Rinse Only 4.1 13Drying/Plate Warmer 0.0 30GSD1200, Hot Start Option 13.3 97GSD1900, Heavy Wash 9.9 71GSD2000, Normal Wash 8.4 66GSD2001 Short Wash 6.9 62Rinse Only 4.1 13Drying/Plate Warmer 0.0 30Consumer SupportTroubleshooting TipsOperating InstructionsSafety InstructionsEnergy OptionsHEATED DRY ON Turns the heating element on for fast drying. This option will extend the time of your wash cycle.Available on all wash cycles exceptRINSE ONLY. Adds approx. 32 minutes to the cycle.HEATED DRY OFF TurnsHEATED DRY off. Dishes air dry naturally and energy is saved.CyclesHEAVY WASH For heavily soiled dishes or cookware with dried-on or baked-on soils. Everyday dishes may be included.This cycle will not remove burned-on foods.NORMAL WASH For loads of everyday dishes, glasses and cookware with medium soils.NOTE: Many dishes have lighter soil than normal.Choosing a cycle other thanNORMAL WASH will save energy and water.SHORT WASH For quickly washing loads of everyday dishes with medium soils that have not dried on, such as loads consistingmostly of glasses.RINSE ONLY For rinsing partial loads that will be washed later.Do not use detergent.PLATE WARMER For warming clean dishes and serving plates. This cycle will take approximately 30 minutes.HOT START Preheats wash water to the correct temperature.Control Settings5GEAppliances.comStartSlowly turn the Dial to theSTART orON position, or the selected cycle. Don’t turn it past theSTART,ON or cycle position, or you could accidentally miss a rinse.There is a time delay between start-up and water fill so you will not hear any wash action right away.n Latch the door to begin the cycle.