InstallationInstructionsBuilt-InDishwasherIf you have questions, call 1-800-361-3400 or visit our website at: www.GEAppliances.caIMPORTANT – The dishwasherMUST be installed to allow for future removal fromthe enclosure if service is required.If you received a damaged dishwasher, you shouldimmediately contact your dealer or builder.Optional Accessories – See the Owner’s Manual foravailable custom panel kits.FOR YOUR SAFETYRead and observe all CAUTIONS and WARNINGSshown throughout these instructions. While performinginstallations described in this booklet, gloves, safetyglasses or goggles should be worn.BEFORE YOU BEGINRead these instructions completely andcarefully.IMPORTANT – Observe allgoverning codes and ordinances.• Note to Installer – Be sure to leave these instructions forthe consumer’s and local inspector’s use.• Note to Consumer – Keep these instructions with yourOwner’s Manual for future reference.• Skill Level – Installation of this dishwasher requires basicmechanical and electrical skills. Properinstallation is the responsibility of the installer.Product failure due to improper installation is notcovered under the GE Appliance Warranty.• Completion Time – 1 to 3 Hours. New installationsrequire more time than replacement installations.READ CAREFULLY.KEEP THESE INSTRUCTIONS.WARNINGTo reduce the risk of electrical shock, fire,or injury to persons, the installer mustensure that the dishwasher is completelyenclosed at the time of installation.If you have an installation problem, contact your dealer orinstaller. You are responsible for providing adequate electrical,exhausting and other connecting facilities.