GE GSD1807 Installation Instructions Manual

Also see for GSD1807: Owner's manual

Contents

Installation Instructions10• If a longer drain hose is required, add up to 42" of length for atotal of 10 ft. to the factory installed hose. Use 5/8" or 7/8"inside diameter hose and a coupler to connect the two hoseends. Secure the connection with hose clamps.Figure USTEP 13 CONNECT DRAIN LINEFOLLOW ALL LOCAL CODES AND ORDINANCES.The drain hose molded end will fit 5/8", 3/4" or 1"diameter connections on the air gap, waste tee ordisposer. Cut on the marked line as required for yourinstallation.DRAIN LINE INSTALLATION• Connect drain line to air gap, waste tee or disposer using eitherpreviously determined method.Waste Tee InstallationMethod 1 – Air gap with waste tee or disposerDisposer InstallationMethod 2 – High drain loop with waste tee or disposerDisposer InstallationFigure WFigure X• Secure the drain hose to the air gap, waste tee or disposer withclamps.NOTE: TOTAL DRAIN HOSE LENGTH MUST NOT EXCEED10 FEET FOR PROPER DRAIN OPERATION.IMPORTANT –When connecting drain line to disposer, checkto be sure that drain plug has been removed.DISHWASHER WILL NOT DRAIN IF PLUG IS LEFT IN PLACE.TIP: Avoid unnecessary service call charges. Alwaysbe sure disposer drain plug has been removed beforeattaching dishwasher drain hose to the disposer.Figure VWaste Tee InstallationCutting Lines1" 3/4" 5/8"IMPORTANT: Do not cut corrugatedportion of hoseFasten to undersideof countertop32"Min.18"Min.Fasten to undersideof countertop18"Min.Hose ClampCoupler Hose ClampRemoveHopperPlug

/ 12

Related manuals for GE GSD1807