Dimensions and Installation Information (in inches)For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.As an EnErgy StAr ®partner, gE has determinedthat this product meets theEnErgy StAr guidelinesfor energy efficiency.Specification Created 4/07 350261PanelThicknessKit A B CGPF325 18-7/8" 23-9/16" 3-11/16" 1/4"GPF375 18-15/16" 23-5/8"* 4-1/4" to3-3/4"**3/4"Listed byUnderwritersLaboratoriesThis wall areamust be free ofpipes or wiresCountertop46Hotwaterline onleft442 Plumbing and electricalservice must enterinside shaded area24" From wall24" MIN.90°19" MIN. from wall24"MIN.634" to 34-3/4"Undersideof countertopto floor5 590°Electricalwiring onrightElectricalwiring is3" fromcabinet2425-3/4MAX.21-1/23-1/4 4 (Adjustable)34 MIN.adj. to 3524-3/423-3/8BAccess insertDoor insert ACModels/Kits A B C ThicknessGE ModelsGPF325 Kit 18-7/8” 23-9/16” 3-11/16” 1/4”GPF375 Kit 18-15/16” 23-5/8”* 3-3/4”** 3/4”*Bottom of panel must be notched 1-1/2"x1/2" to clearacross panel**Adjustment required to match adjcent cabinets fronts due toleveling leg adjustment, 4" nominal.4-1/4" toElectrical RatingVoltage AC.......................................................... 120Hertz..................................................................... 60Total connected load amperage............. 6.2Calrod® heater watts max........................ 500For use on adequately wired 120-volt,15-amp circuit having 2-wire servicewith a separate ground wire. This appliancemust be grounded for safe operation.Note: Dishwasher must not be installedmore than 10 feet from sink for properdrainage. All plumbing and electrical workmust be in accordance with local codes.GSD2300/2301NGE® Built-In Dishwasher* Bottom of panel must be notched 1-1/2" x 1/2" to clear across panel** Adjustment required to match adjacent cabinet fronts dueto leveling leg adjustment, 4" nominal