GE GSD3310 Owner's Manual

Also see for GSD3310: Owner's manual

Contents

Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service22Before you call for service…Troubleshooting TipsProblemPossible Causes What To DoSpots and filming • UseJet-Dry ® rinse agent toon glasses and remove spots and preventflatware new film build-up.• To remove stubborn spotsand pre-existing film fromglassware:1 Remove all metal utensilsfrom the dishwasher.2 Do not add detergent.3 Select the longest cycle.4 Start the dishwasher andallow to run for 18 to 22minutes. Dishwasher willnow be in the main wash.5 Open the door and pour2 cups (500 ml) of whitevinegar into the bottom ofthe dishwasher.6 Close the door and allowto complete the cycle.If vinegar rinse doesn’twork: Repeat as above,except use 1/4 cup (60 ml)of citric acid crystalsinstead of vinegar.Cloudiness on Combination of soft • This is calledetching andglassware water and too much is permanent. To preventdetergent this from happening, useless detergent if you havesoft water. Wash glasswarein the shortest cycle thatwill get them clean.Water temperature • Lower the water heaterentering the dishwasher temperature.exceeds 150°F.Extremely hard waterLow inlet watertemperatureOverloading thedishwasherImproper loadingOld or damp powderdetergentRinse agent dispenseremptyToo little detergent