HOW TO CHANGE COLOR PANELSIf you are redecorating, you can change your dishwasher’s front panel tomatch or blend with your new colors by flipping it over. Each side of eachpanel is a different color. You may also paint a panel with a color of yourown choice.How to Change the Door Panel:1. Take out trim screws on either side of thedishwasher door. Remove the side trim.2. Slide the door panel out.(Careful—edges may be sharp.)3. Turn the door panel around and put the color youwant in front.4. Replace the door panel, side trim and screws.Wood panel Trim Kits (Available for both models)Wood panel trim kits, contain trim andinstructions for adding a decorative wood doorpanel and lower access panel no thicker than 1/4”to match kitchen cabinets.Specify the trim color of your choice from thefollowing options:GPF40BC (Chrome Trim and Screws)GPF40BK (Black Trim)GPF40WH (White Trim)The kit is available for $5.00 (shipping and handling).Make check payable to the General Electric Co.NOTE: Do not operatedishwasher while changingpanels or when lower accesspanel is removed.COIOr panels (For model GSD500 only)If you have redecorated, and the color panels inyour dishwasher do not blend with your new colorscheme you may order one additional color panelwithout char&e.Specify the color panel you would like from thefollowing options:GPF24 White/AlmondGPF26 HarvestiBlackOrder a Trim Kit or a Color Panel from:GE Appliancesc/o Dri-View Manufacturing4706 Allmond Ave.Louisville. KY 4020912