HOW TO CHANGE COLOR PANELSIf you are redecorating, you can change your dishwasher’s front panels tomatch or blend with your new colors by flipping them over. Each side ofeach panel is a different color. You may also paint a panel with a color ofyour own choice.How to Change the Door Panel:1. Take out trim screws on either side of thedishwasher door. Remove the side trim.2. Slide the door panel out.(Careful—edges may be sharp.)3. Turn the door panel around and put the color youwant in front.4. Replace the door panel, side trim and screws.NOTE: Do not operatedishwasher while changingpanels or when lower accesspanel is removed.How to Change the Lower Panel:Attachment Screws1. Remove the panel attachment screws.2. Remove the entire access assembly by lifting it upand over the retaining tabs.3. Take out the top trim screws and remove thetop trim.4. Slide the color panel(s) up and out and put thecolor you want in front.5. Replace the top trim and screws.6. Replace the entire access assembly by hanging itback on the retaining tabs. Hold the access assemblyin place and replace the attachment screws.Wood panel fiim Kits (Available for both models)Wood panel trim kits, contain trim andinstructions for adding a decorative wood doorpanel and lower access panel no thicker than 1/4”to match kitchen cabinets.Specify the trim color of your choice from thefollowing options:GPF40BC (Chrome Trim and Screws)GPF40BK (Black Trim)GPF40WH (White Trim)The kit is available for $5.00 (shipping and handling).Make check payable to the General Electric Co.color Panels (For model GSD900 only)If you have redecorated, and the color panels inyour dishwasher do not blend with your new colorscheme you may order one additional color panelwithout charge.Specify the color panel you would like from thefollowing options:GPF24 White/AlmondGPF26 HarvestiBlack.Order a Trim Kit or a Color Panel from:GE Appliancesc/o Dri-View Manufacturing4706 Allmond Ave.Louisville, KY 40209