GE GSS23LGT Owner's Manual And Installation

Also see for GSS23LGT: Dimensions and installation information

9Consumer SupportTroubleshooting TipsOperating InstructionsSafety InstructionsInstallation InstructionsAbout the refrigerator doors.ge.comRefrigerator DoorsThe refrigerator doors may feel differentthan the ones you are used to. Thespecial door opening/closing featuremakes sure the doors close all the wayand are securely sealed.When opening and closing the door youwill notice astop position. If the door isopened past thisstop point, the door willremain open to allow you to load andunload food more easily. When the dooris only partially open, it will automaticallyclose.The resistance you feel at thestopposition will be reduced as the dooris loaded with food.When the door is only partially open,it will automatically close.Beyond this stop the door willstay open.Door AlignmentIf doors are uneven, adjust therefrigerator door.Using a 7/16″ socket wrench, turnthe door adjusting screw to the rightto raise the door; to the left, to lowerit. (A nylon plug, imbedded in thethreads of the pin, prevents the pinfrom turning unless a wrench isused.)After one or two turns of thewrench, open and close therefrigerator door and check thealignment at the top of the doors.To remove the basegrille, open the doors,remove the screw ateach end of the basegrille and then pullthe grille straight out.7/16″ Socket WrenchRaise Support LegBefore moving the refrigerator, you willneed to screw up the support leg. Oncethe unit is relocated, you will need toscrew down the support leg again.Screw down the supportleg until it touches thefloor. This will preventdoor misalignment.