GE GTS17BBMR Owner's Manual And Installation Instructions

Also see for 16: Owner's manual and installation instructions Owner's manual and installation instructions User guide Owner's Manual & Installation Instructions Owner's manual and installation instructions

Contents

20Installation InstructionsREVERSING THE DOOR SWING (CONT.)22.1 Tape the door shut with masking tape.REMOVE THE FREEZER DOOR22.2 With a 5/16″ hex-head socket driver, remove thescrews that hold the top hinge to the cabinet.2.3 Lift the hinge (and the shim glued to it) straightup to free the hinge pin from the socket inthe top of the door and set it aside, along withits screws.Top Hinge2.6 Transfer the 2 screws from the opposite side ofthe cabinet to the screw holes vacated by thetop hinge removal.2.5 Set the door on a non-scratching surface withthe outside up.2.4 Remove the tape and tilt the door away from thecabinet. Lift it off the center hinge pin.1.1 Unplug the refrigerator from its electricaloutlet.BEFORE YOU START11.2 Empty all door shelves, including the dairycompartment.CAUTION: Do not let either door drop to thefloor. To do so could damage the door stop.