GE IS200ADIIH A Series Manual

g GE Industrial SystemsAuxiliary Drive to ISBus Interface BoardIS200ADIIH_A_ _Safety Symbol LegendIndicates a procedure orcondition that, if not strictlyobserved, could result inpersonal injury or death.These instructions do not purport to cover all details or variations in equipment, nor toprovide every possible contingency to be met during installation, operation, andmaintenance. If further information is desired or if particular problems arise that are notcovered sufficiently for the purchaserís purpose, the matter should be referred to GEIndustrial Systems.This document contains proprietary information of General Electric Company, USA, and isfurnished to its customer solely to assist that customer in the installation, testing,operation, and/or maintenance of the equipment described. This document shall not bereproduced in whole or in part, nor shall its contents be disclosed to any third partywithout the written approval of GE Industrial Systems.Indicates a procedure orcondition that, if not strictlyobserved, could result in damageto or destruction of equipment.Note Indicates an essential orimportant procedure orstatement.SectionPageFunctional Description............................................................................................ 2ISBus ............................................................................................................... 3Connections ................................................................................................ 3Performance ................................................................................................ 4Data Mapping.............................................................................................. 5Drive Parameters ............................................................................................. 7LAN Validation .......................................................................................... 7LAN Faults ................................................................................................. 8Application Data ..................................................................................................... 9LED Indicators............................................................................................... 11Testpoints....................................................................................................... 12Connectors ..................................................................................................... 12Installation and Renewal/Warranty Replacement ................................................. 14How to Order a Board.................................................................................... 14Board Identification .................................................................................. 14Warranty Terms ........................................................................................ 15Placing the Order ...................................................................................... 15Handling Precautions..................................................................................... 15New Installations ........................................................................................... 16ADII Required Parts ................................................................................. 16Installation Procedures.............................................................................. 17Replacement Procedures................................................................................ 18Innovation Series is a trademark of General Electric Company, USAGEI-100305