GE JBP24 Owner's Manual

Also see for JBP24: Owner's manual Owner's manual Installation instructions Installation instructions Installation instructions

GE JBP24 Owner's Manual Manual pdf 7 page image

7Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Supportwww.GEAppliances.comOven Control, Clock and Timer Features and SettingsAUTOMATIC OVEN LightThis lights anytime the oven has beenprogrammed using the COOKING TIME orSTART TIME functions.OVEN LIGHT ON/OFF PadTouch this pad to turn the oven light on oroff.– PadShort taps to this pad will decrease the timeor temperature by small amounts. Touchand hold the pad to decrease the time ortemperature by larger amounts.+ PadShort taps to this pad will increase the timeor temperature by small amounts. Touchand hold the pad to increase the time ortemperature by larger amounts.SELF CLEAN PadTouch this pad to select the self-cleaningfunction. See the Using the self-cleaningoven section.CLEAN LightFlashes while in edit mode—you can changethe length of time for the self-clean cycle atthis point. Glows when the oven is in the self-clean cycle. After the self-clean cycle, the lightwill turn off. Unlatch the door.CLEAR/OFF PadTouch this pad to cancel ALL ovenoperations except the clock and timer.BROIL HI/LO PadTouch this pad to select the broil function.BROIL LightFlashes while in edit mode—you can switchfrom HI to LO BROIL at this point. Glows whenthe oven is in broil mode.Indicator Lights (on some pads)EDIT mode lasts several seconds after the lastpad press. START TIME ON/OFF and COOKINGTIME ON/OFF will be the only pads lit if eitherof these options is selected. (Example: STARTTIME is selected with BAKE—the START TIMEpad will remain lit until the clock reaches theprogrammed time, at which point it will turnoff and the BAKE/TEMP RECALL pad light willlight up).Power OutageIf a flashing time is in the display, you have experienced apower failure. Reset the clock.To reset the clock, touch the CLOCK pad. Enterthe correct time of day by touching the + or –pads. Touch the START/ON pad.