33Troubleshooting TipsInstallation InstructionsCustomer ServiceOperating InstructionsSafety InformationPrepare the OpeningAllow 11⁄2″ spacing from the range to adjacent vertical walls above cooktopsurface.Allow 30″ minimum clearance between surface units and bottom of unprotectedwood or metal top cabinet, and 15″ minimum between countertop and adjacentcabinet bottom.EXCEPTION: Installation of a listed microwave oven or cooking appliance over the cooktop shallconform to the installation instructions packed with that appliance.If cabinet storage is installed, reduce risk by installing a range hood that projectshorizontally a min. of 5″ beyond the bottom of the cabinets. Make sure the wallcovering, countertops and cabinets around the range can withstand heatgenerated by the range, oven or cooktop up to 200°F.1Install theoutlet boxon eitherside ofthe COutlet boxCordWallAnti-Tip Bracket(install in either rear corner)Floor7″71⁄2″31⁄2″7 1⁄ 2″21⁄4″5″145⁄8″C of rangeLLHoodWallNot less than the widthof the range5″ Min.30″Min.15″Min.11⁄2″Min.Locate the outlet box within either shaded area.Read these instructions completely and carefully.