GE JBP74 Owner's Manual

Also see for JBP77: Use and care guide Use and care & installation guide Owner's manual Owner's manual Owner's manual

GE JBP74 Owner's Manual Manual pdf 8 page image

Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety InstructionsTemperature LimiterEvery radiant surface unit has atemperature limiter.The temperature limiter protects theglass cooktop from getting too hot.The temperature limiter may cycle theunits off for a time if: The pan boils dry. The pan bottom is not flat. The pan is off center. There is no pan on the unit.Dual Surface Unit Control KnobThe dual surface unit has 2 cooking sizes to selectfrom so you can match the size of the unit to thesize of the cookware you are using.To use the small surface unit, turn thecontrol knob to the SMALL BURNERsettings.To use the large surface unit, turn thecontrol knob to the LARGE BURNERsettings.9" 6"Using the surface units.Throughout this manual, features and appearance may vary from your model.How to SetPush the knob in and turn in eitherdirection to the setting you want.At both OFF and HI the control clicksinto position. You may hear slight clickingsounds during cooking, indicating thecontrol is keeping the power level you set.A HOT COOKTOP indicator light will glowwhen any radiant element is turned on,and will remain on until the surface iscooled to approximately 150°F.Indicator light will: come on when the unit is turned on or hotto the touch. stay on even after the unit is turned off. glow until the unit is cooled to approximately150°F.Be sure you turn the control knob toOFF when you finish cooking.Using the Bridge BurnerTo use the bridge burner, turn thecontrol knob to the BRIDGE BURNERsettings.For full bridge burner operation, turnon the rear burner.To use only the front burner, turn thecontrol knob to the FRONT BURNERsettings.8Triple Surface Unit Control Knob (on some models)The triple surface unit has 3 cooking sizes toselect from so you can match the size of the unitto the size of the cookware you are using.To use the small surface unit, turn thecontrol knob counterclockwise to thesmall burner settings.To use the medium surface unit, turn thecontrol knob clockwise (past the largeburner) or counterclockwise (past the smallburner) to the medium burner settings.To use the large surface unit, turn thecontrol knob clockwise to the largeburner settings.