GE JBPBO Use And Care & Installation Manual

Also see for JBP90: Owner's manual Installation instructions Owner's manual Use and care & installation guide Use and care & installation guide

Contents

GE JBPBO Use And Care & Installation Manual Manual pdf 53 page image

STEP 8ANTI-TIP BRACKET INSTALLATIONAN ANTI-TIP bracket is supplied with instructionsfor installation in a variety of locations. Theinstructions include a template, a parts list and alist of tools necessary to complete the installation.Read the IMPORTANT SAFETY INSTRUCTIONSand the instructions that fit your situation beforebeginning installation.WARNING1. Range must be secured by ANTI-TIP bracketsupplied.2. See instructions to install (supplied withbracket).3. Unless properly installed, range could betipped by stepping or sitting on door. Injurymight result from spilled hot liquids or fromrange itself.Typical Installation of Anti-Tip BracketAttachment to WallBracketScrew Must Enter _ I i WalI PlateSTEP 9LEVELING THE RANGEThe range must be level. Leveling feet are locatedat each corner of the base of the range. Removethe storage drawer or kick panel (depending onyour model) and using channel locks, rotate theleveling feet in and out as required to level therange. (For instructions on how to remove andreplace the storage drawer or the kick panel, seethe Cleaning Under the Range section in Careand Cleaning.) On some models, there are plasticcovers which may be removed for easyadjustment (just squeeze and pull).One of the rear leveling feet will engage theANTI-TIP bracket (allow for some side to sideadjustment). Allow a minimum clearance of 1/8-inch between the range and the leveling foot thatis to be installed into the ANTI-TIP bracket.Check the range for proper installation into theANTI-TIP bracket (after the range has beenproperly installed) by removing the kick panel orstorage drawer and inspecting the rear levelingleg. Make sure it fits securely into the slot.STEP 10FINAL CHECKBe sure all switches are in the OFF positionbefore leaving the range.53