GE JCP910 Owner's Manual

Also see for JCP910: Installation instructions

Contents

GE JCP910 Owner's Manual Manual pdf 6 page image

Throughout this manual, features and appearance may vary from your model.Never cook directly on the glass.Always use cookware.About the radiant surface elements…The radiant cooktop features heatingelements beneath a smooth glass surface.NOTE: A slight odor is normal when a newcooktop is used for the first time. It is caused bythe heating of new parts and insulating materialsand will disappear in a short time.NOTE: On models with light colored glasscooktops, it is normal for the cooking zones tochange color when hot or cooling down. This istemporary and will disappear as glass cools toroom temperature.The surface element will cycle on and offto maintain your selected control setting.It is safe to place hot cookware (from theoven or surface) on the glass cooktopwhen the surface is cool.Even after the surface elements areturned off, the glass cooktop retainsenough heat to continue cooking. Toavoid overcooking, remove pans fromthe surface elements when the foodis cooked. Avoid placing utensils thatcould become hot or plastics that couldmelt on the surface element until it hascooled completely. Water stains (mineral deposits) are removableusing the cleaning cream or full strength whitevinegar. Use of window cleaner may leave aniridescent film on the cooktop. The cleaningcream will remove this discoloration. Don’t store heavy items above the cooktop.If they drop onto the cooktop, they can causedamage. Do not use the surface as a cutting board. SURFACECOOKINGOFF CENTERAlways center the pan on the surfaceelement you are using.DRAGGINGDo not slide cookware across thecooktop because it can scratch theglass. The glass is scratch-resistant,not scratchproof.How to SetPush the knob down and turn in eitherdirection to the setting you want. Whenthe control is in any position other thanOFF, it may be rotated without pushingit down.At both OFF and HI the controlclicks into position. You may hearslight clicking sounds during cooking,indicating the control is keeping thepower level you set.The controls for the radiant surfaceelements can be set anywhere betweenLO and HI for an unlimited number ofheat settings. With the infinite switch theelement cycles on and off to maintainyour selected control setting.The ELEMENT ON indicator light willglow when any surface element is on.A HOT SURFACE indicator light will glowwhen any radiant element is turned onand will remain on until the surface iscooled to approximately 150°F.NOTE: It comes on when the element is hot to thetouch. It stays on even after the element is turned off. It glows brightly until the element is cooled toapproximately 150°F. Be sure you turn the control knob to OFF whenyou finish cooking.Using the surface elements.6Safety InstructionsOperating InstructionsCare and CleaningTroubleshooting TipsConsumer Support